1 files changed, 12 insertions, 44 deletions
diff --git a/core/voice.cpp b/core/voice.cpp
index 5263202e..15330012 100644
--- a/core/voice.cpp
+++ b/core/voice.cpp
@@ -892,52 +892,20 @@ void Voice::prepare(DeviceBase *device)
     /* Make sure the sample history is cleared. */
     std::fill(mPrevSamples.begin(), mPrevSamples.end(), HistoryLine{});
 
-    /* Don't need to set the VoiceIsAmbisonic flag if the device is not higher
-     * order than the voice. No HF scaling is necessary to mix it.
+    /* 2-channel UHJ needs different shelf filters. However, we can't just use
+     * different shelf filters after mixing it, given any old speaker setup the
+     * user has. To make this work, we apply the expected shelf filters for
+     * decoding UHJ2 to quad (only needs LF scaling), and act as if those 4
+     * quad channels are encoded right back into B-Format.
+     *
+     * This isn't perfect, but without an entirely separate and limited UHJ2
+     * path, it's better than nothing.
+     *
+     * Do not apply the shelf filter with UHJ output. UHJ2->B-Format->UHJ2 is
+     * identity, so don't mess with it.
      */
-    if(mAmbiOrder && device->mAmbiOrder > mAmbiOrder)
+    if(mFmtChannels == FmtUHJ2 && !device->mUhjEncoder)
     {
-        const uint8_t *OrderFromChan{Is2DAmbisonic(mFmtChannels) ?
-            AmbiIndex::OrderFrom2DChannel().data() : AmbiIndex::OrderFromChannel().data()};
-        const auto scales = AmbiScale::GetHFOrderScales(mAmbiOrder, !Is2DAmbisonic(mFmtChannels));
-
-        const BandSplitter splitter{device->mXOverFreq / static_cast<float>(device->Frequency)};
-        for(auto &chandata : mChans)
-        {
-            chandata.mAmbiHFScale = scales[*(OrderFromChan++)];
-            chandata.mAmbiLFScale = 1.0f;
-            chandata.mAmbiSplitter = splitter;
-            chandata.mDryParams = DirectParams{};
-            chandata.mDryParams.NFCtrlFilter = device->mNFCtrlFilter;
-            std::fill_n(chandata.mWetParams.begin(), device->NumAuxSends, SendParams{});
-        }
-        /* 2-channel UHJ needs different shelf filters. However, we can't just
-         * use different shelf filters after mixing it and with any old speaker
-         * setup the user has. To make this work, we apply the expected shelf
-         * filters for decoding UHJ2 to quad (only needs LF scaling), and act
-         * as if those 4 quad channels are encoded right back onto higher-order
-         * B-Format.
-         *
-         * This isn't perfect, but without an entirely separate and limited
-         * UHJ2 path, it's better than nothing.
-         */
-        if(mFmtChannels == FmtUHJ2)
-        {
-            mChans[0].mAmbiHFScale = 1.0f;
-            mChans[0].mAmbiLFScale = UhjDecoder<UhjLengthStd>::sWLFScale;
-            mChans[1].mAmbiHFScale = 1.0f;
-            mChans[1].mAmbiLFScale = UhjDecoder<UhjLengthStd>::sXYLFScale;
-            mChans[2].mAmbiHFScale = 1.0f;
-            mChans[2].mAmbiLFScale = UhjDecoder<UhjLengthStd>::sXYLFScale;
-        }
-        mFlags.set(VoiceIsAmbisonic);
-    }
-    else if(mFmtChannels == FmtUHJ2 && !device->mUhjEncoder)
-    {
-        /* 2-channel UHJ with first-order output also needs the shelf filter
-         * correction applied, except with UHJ output (UHJ2->B-Format->UHJ2 is
-         * identity, so don't mess with it).
-         */
         const BandSplitter splitter{device->mXOverFreq / static_cast<float>(device->Frequency)};
         for(auto &chandata : mChans)
         {