Merged changes between 1.4.0-beta3 and 1.4.0-beta4 into dev-1_5

1 files changed, 0 insertions, 171 deletions

diff --git a/src/ConfiguredUniverse/j3d1x3-cave b/src/ConfiguredUniverse/j3d1x3-cave
deleted file mode 100644
index afc532c..0000000
--- a/src/ConfiguredUniverse/j3d1x3-cave
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * $RCSfile$
- *
- * Copyright (c) 2006 Sun Microsystems, Inc. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * - Redistribution of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- *
- * - Redistribution in binary form must reproduce the above copyright
- *   notice, this list of conditions and the following disclaimer in
- *   the documentation and/or other materials provided with the
- *   distribution.
- *
- * Neither the name of Sun Microsystems, Inc. or the names of
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * This software is provided "AS IS," without a warranty of any
- * kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND
- * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY
- * EXCLUDED. SUN MICROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL
- * NOT BE LIABLE FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF
- * USING, MODIFYING OR DISTRIBUTING THIS SOFTWARE OR ITS
- * DERIVATIVES. IN NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR
- * ANY LOST REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL,
- * CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND
- * REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF THE USE OF OR
- * INABILITY TO USE THIS SOFTWARE, EVEN IF SUN HAS BEEN ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- *
- * You acknowledge that this software is not designed, licensed or
- * intended for use in the design, construction, operation or
- * maintenance of any nuclear facility.
- *
- * $Revision$
- * $Date$
- * $State$
- */
-
-/*
- ************************************************************************
- *  
- * Java 3D configuration file for a cave environment.  This cave
- * consists of 3 projectors with 3 screens to the left, front, and right
- * of the user, all at 90 degrees to each other.
- * 
- * The projectors in the VirtualPortal sample site are actually turned
- * on their sides to get more height.  Screen 0 is rotated 90 degrees
- * counter-clockwise, while screens 1 and 2 are rotated 90 degrees
- * clockwise.
- * 
- ************************************************************************
- */
-
-// Create new screen objects and associate them with logical names and numbers.
-// These numbers are used as indices to retrieve the AWT GraphicsDevice from
-// the array that GraphicsEnvironment.getScreenDevices() returns.
-// 
-// NOTE: The GraphicsDevice order in the array is specific to the local
-// site and display system.
-// 
-(NewScreen              left    0)
-(NewScreen              center  1)
-(NewScreen              right   2)
-
-
-// Set the available image areas as well as their positition and orientation
-// relative to the tracker base.   Although this config file doesn't enable
-// head tracking, the tracker base is still needed as a point of reference to
-// describe the position and orientation of the screens relative to the
-// environment. 
-// 
-// From the orientation of a user standing within this VirtualPortal site and
-// facing the center screen, the tracker base is along the vertical midline of
-// the screen, 0.248 meters down from the top edge, and 1.340 meters in front
-// of it.  The tracker base is oriented so that its +X axis points to the left,
-// its +Y axis points toward the screen, and its +Z axis points toward the
-// floor.
-// 
-(ScreenAttribute        left    PhysicalScreenWidth     2.480)
-(ScreenAttribute        left    PhysicalScreenHeight    1.705)
-(ScreenAttribute        left    WindowSize              NoBorderFullScreen)
-(ScreenAttribute        left    TrackerBaseToImagePlate
-                                (( 0.0  0.0 -1.0  2.230)
-                                 ( 0.0 -1.0  0.0  1.340)
-                                 (-1.0  0.0  0.0  0.885)))
-
-(ScreenAttribute        center  PhysicalScreenWidth     2.485)
-(ScreenAttribute        center  PhysicalScreenHeight    1.745)
-(ScreenAttribute        center  WindowSize              NoBorderFullScreen)
-(ScreenAttribute        center  TrackerBaseToImagePlate
-                                (( 0.0  0.0  1.0  0.248)
-                                 (-1.0  0.0  0.0  0.885)
-                                 ( 0.0 -1.0  0.0  1.340)))
-
-(ScreenAttribute        right   PhysicalScreenWidth     2.480)
-(ScreenAttribute        right   PhysicalScreenHeight    1.775)
-(ScreenAttribute        right   WindowSize              NoBorderFullScreen)
-(ScreenAttribute        right   TrackerBaseToImagePlate
-                                (( 0.0  0.0  1.0  0.2488)
-                                 ( 0.0 -1.0  0.0  1.340)
-                                 ( 1.0  0.0  0.0  0.860)))
-
-// Set the location of the center of coexistence relative to the tracker base.
-// Here it set to the center of the center screen.  This config file will set
-// the location of the user's eyes relative to this point.  The default view
-// attach policy of NOMINAL_SCREEN used by ConfiguredUniverse will place the
-// origin of the view platform in coexistence coordinates at the center of
-// coexistence. 
-// 
-(NewPhysicalEnvironment         VirtualPortal)
-(PhysicalEnvironmentAttribute   VirtualPortal
-                                CoexistenceToTrackerBase
-                                ((-1.0  0.0  0.0  0.000)
-                                 ( 0.0  0.0 -1.0  1.340)
-                                 ( 0.0 -1.0  0.0  0.994)))
-
-// The above center of coexistence is appropriate for the sample geometry
-// files available in the programs/examples directory.  Often a more
-// immersive point of view is required for larger virtual worlds.  This can be
-// achieved by placing the center of coexistence closer to the nominal position
-// of the user's head, so that the view platform origin in coexistence
-// coordinates will map there as well.
-// 
-// Here we set the location of the center of coexistence 0.5 meters along the
-// tracker base +Z axis, 1.737 meters from the floor (about 5 ft 8.4 inches).
-// 
-// (PhysicalEnvironmentAttribute   VirtualPortal
-//                                 CoexistenceToTrackerBase
-//                                 ((-1.0  0.0  0.0  0.0)
-//                                  ( 0.0  0.0 -1.0  0.0)
-//                                  ( 0.0 -1.0  0.0  0.5)))
-
-
-// Now define the view.
-// 
-(NewView        view0)
-(ViewAttribute  view0   Screen                  left)
-(ViewAttribute  view0   Screen                  center)
-(ViewAttribute  view0   Screen                  right)
-(ViewAttribute  view0   PhysicalEnvironment     VirtualPortal)
-
-// Set the user eye position in the display environment.  It is set here to
-// 1.340 meters back from the center screen (directly under the tracker), and
-// 1.737 meters from the floor (about 5 ft 8.4 inches).
-//
-(ViewAttribute  view0   CenterEyeInCoexistence  (0.0 0.494 1.340))
-
-// Here is an alternative center eye position to use with the immersive
-// coexistence coordinate system defined in comments above.
-// 
-// (ViewAttribute  view0   CenterEyeInCoexistence  (0.0 0.0 0.0))
-
-// Set the screen scale.  This is scale factor from virtual to physical
-// coordinates.
-// 
-(ViewAttribute  view0   ScreenScalePolicy       SCALE_SCREEN_SIZE)
-
-// Alternative for explict scaling.
-// 
-// (ViewAttribute  view0   ScreenScalePolicy       SCALE_EXPLICIT)
-// (ViewAttribute  view0   ScreenScale             5.00)
-
-// No stereo viewing for this configuration.
-// 
-(ViewAttribute  view0   StereoEnable            False)